2022, №71
https://doi.org/10.33271/crpnmu/71
B. Sobko, O. Lozhnikov, M. Voronyi
Determination the influence of the rock mass density on the productivity of wheel loaders at the iron ore pit mining
B. Sobko, V. Kriachek
Establish of the optimum parameters of the Pinyazevytsky granite deposit mining system
О. Аnisimov, О. Ivanyk
Methods of creating a conveyor lift route in a deep pit
Yu. Voitenko, V. Vapnichna, M. Krivtsov, О. Voitenko
On the time of well transition to industrial production mode
S. Joukov, Ju. Hryhoriev, S. Lutsenko
Analysis of technological approaches and development experience of Kryvbass tailings
M. Kononenko, O. Khomenko, A. Kosenko
Improvement of the current methodology for calculating the parameters of drilling and blasting on the explosive force
M. Musykhin, G. Tuganov
Justification of the application of low-viscus polyurethane in conditions of poorly water-saturated soils
M. Petlovanyi, K. Sai, O. Stoliarska
Problems of waste rock formation during mining of Western Donbass coal reserves: state-of-the-art and solutions
P. Saik, V. Lozynskyi, D. Malachkevych, O. Cherniaіeva
To the issue of underground gasification of low-thickness unconditioned coal reserves
S. Felonenko, V. Gubkina, O. Tverdokhlib, O. Trofymova
Substantiating rational parameters for a stull-timbered device of the selective heading machine
V. Kuznetsov, M. Tryputen, A. Nikolenko, D. Tsyplenkov, V. Kuvaiev, O. Savvin
Identification of the thermal process in an induction motor
Ya. Yaroshenko, O. Bobrov, D. Tsyplenkov, V. Kuznetsov, O. Savvin
Electricity storage systems
V. Ishkov, Ye. Kozii, O. Chernobuk, M. Kozar, O. Dreshpak
About relationship between germanium concentration and the content of toxic elements and total sulfur in the coal seam c8h of the Dniprovska mine
M. Ruzina, O. Tereshkova, Y. Dementieva, I. Zhyltsova, M. Malova
Petrography composion and ore-bearing of ultrabasits from the South-Bilozersky massif of the Middle-Dniprean mega-block of the Ukrainian shield
S. Shevchenko, I. Tkachuk
Study of colour change factors for some varieties of gems
O. Aziukovskyi, V. Gristchak, K. Ziborov, S. Fedoriachenko, T. Kravchuk
On the problem of nonlinear dynamics of shell systems influenced by the internal pressure local impulse
O. Нolovchenko, V. Hrigorenko
Investigation of the influence on the cross-wall difference of tubes of the double-feed and return cold pillar rolling process at the present conditions
S. Kovalevskyy, O. Kovalevska, D. Sydiuk
To management of the properties of materials for the subsequent optimization of life cycles of products
I. Novitskyi, V. Sliesariev, Y. Shevchenko
Self-adjusting filling control system for self-grinding drum mills
I. Novitskyi, V. Sliesariev, Y. Shevchenko
System approach in optimal management problems for two-stage technological lines
V. Derbaba, S. Patsera, V. Hryhorenko
Features of mechanical processing of wear-resistant cast iron
